To get started with Raspberry Pi, you need an operating system. NOOBS (New Out Of Box Software) is an easy operating system install manager for the Raspberry Pi.
HOW TO GET AND INSTALL NOOBS
BUY PREINSTALLED SD CARD
SD cards with NOOBS preinstalled are available from many of our distributors and independent retailers, such as Pimoroni, Adafruit and The Pi Hut. For older models of Raspberry Pi, you’ll need a full-size SD card; for the Pi Zero, A+, B+, Pi 2 and Pi 3 you’ll need a micro SD card.
We recommend using an SD card with a minimum capacity of 8GB.
- Using a computer with an SD card reader, visit the Downloads page.
- Click on NOOBS, then click on the
Download ZIPbutton under ‘NOOBS (offline and network install)’, and select a folder to save it to.
- Extract the files from the zip.
FORMAT YOUR SD CARD
It is best to format your SD card before copying the NOOBS files onto it. To do this:
Visit the SD Association’s website and download SD Formatter 4.0 for either Windows or Mac.
Follow the instructions to install the software.
Insert your SD card into the computer or laptop’s SD card reader and make a note of the drive letter allocated to it, e.g. G:/
In SD Formatter, select the drive letter for your SD card and format it.
DRAG AND DROP NOOBS FILES
Once your SD card has been formatted, drag all the files in the extracted NOOBS folder and drop them onto the SD card drive.
The necessary files will then be transferred to your SD card.
When this process has finished, safely remove the SD card and insert it into your Raspberry Pi.
Plug in your keyboard, mouse, and monitor cables.
Now plug the USB power cable into your Pi.
Your Raspberry Pi will boot, and a window will appear with a list of different operating systems that you can install. We recommend that you use Raspbian – tick the box next to Raspbian and click on
Raspbian will then run through its installation process. Note that this can take a while.
When the install process has completed, the Raspberry Pi configuration menu (raspi-config) will load. Here you are able to set the time and date for your region, enable a Raspberry Pi camera board, or even create users. You can exit this menu by using Tab on your keyboard to move to
LOGGING IN AND ACCESSING THE GRAPHICAL USER INTERFACE
The default login for Raspbian is username
pi with the password